How to Fix Fusible Interfacing Problems With Clothes

It’s a fabric that’s applied to the wrong side of a fabric piece to provide structure, stability, and durability to certain areas of a garment. However, like any other sewing technique, problems can arise when working with fusible interfacing. Whether it's bubbling, peeling, or simply not adhering properly, these issues can be frustrating and impact the quality of your finished garment. But fear not! There are several solutions and tips to help fix fusible interfacing problems with clothes. One effective solution is to use Madeira Aerolock Premium Serger thread. This high-quality, core-spun thread is made of 100% polyester and is designed to withstand frequent washes and strains. It’s perfect for use with sergers, overlock machines, and coverlock machines like the Janome CoverPro family. By using a durable and reliable thread like Madeira Aerolock, you can ensure that your fusible interfacing stays in place and maintains it’s integrity over time. So, let's dive into the various issues you may encounter with fusible interfacing and explore the solutions that will help you achieve professional-looking results every time.

How Do You Iron on Interfacing?

Fusible interfacing is a key component in adding structure and stability to garments. However, ironing on interfacing can sometimes present challenges. To ensure a successful application, it’s important to follow a few key steps.

First, start by pre-washing and drying both the fabric and the interfacing. This helps to remove any chemicals or finishes that may interfere with the fusible adhesive. Once both are dry, lay the fabric flat on an ironing board and position the interfacing with the adhesive side down on the wrong side of the fabric.

Next, set your iron to the appropriate temperature for the fabric and interfacing being used. It’s important to refer to the manufacturers instructions for the recommended heat setting. Once the iron is heated, press it down firmly on top of the interfacing. Avoid sliding the iron back and forth, as this can cause the interfacing to shift or stretch.

If you’re experiencing issues with the fusible interfacing, such as bubbling or peeling, there are a few potential solutions. First, check to ensure that the iron is set to the correct temperature. If the iron is too hot, it can cause the adhesive to bubble or melt, leading to an uneven application. Adjust the heat setting accordingly and try again.

Additionally, make sure that you’re using a good quality fusible interfacing that’s appropriate for the fabric being used. Different fabrics may require different types or weights of interfacing. If the interfacing is too heavy for the fabric, it may not adhere properly or create unwanted bulk. Experiment with different interfacing options to find the best match for your project.

If the adhesive on the interfacing isn’t sticking, you may need to try using a pressing cloth. A pressing cloth is a thin piece of fabric, such as muslin or cotton, that’s placed between the iron and the interfacing. This can help to distribute the heat more evenly and protect the fabric and interfacing from direct contact with the iron.

Techniques for Reinforcing Specific Areas of a Garment With Interfacing

  • Applying interfacing to collar and cuffs to provide structure and stability.
  • Using interfacing on waistbands and waist areas to prevent stretching and maintain shape.
  • Reinforcing buttonholes and closures with interfacing for increased durability.
  • Applying interfacing to pocket openings to prevent sagging or distortion.
  • Using interfacing on shoulder seams to provide support and prevent stretching.
  • Reinforcing facings and plackets with interfacing for a neat and professional finish.
  • Applying interfacing to areas prone to wrinkling, such as hems and collar points, to improve appearance and longevity.
  • Using interfacing on seams of lightweight fabrics to add strength and prevent tearing.
  • Reinforcing specific design details, such as pleats or tucks, with interfacing to ensure they hold their shape.

Conclusion

By following the steps outlined in this article, such as prewashing the fabric, selecting the right type of interfacing, using proper pressing tools and techniques, and considering alternatives such as fabric glue or hand sewing, individuals can effectively troubleshoot and resolve these common problems. Additionally, by using high-quality threads such as Madeira Aerolock Premium Serger thread, which offers durability and strength, sewers can ensure that their repairs and alterations will withstand frequent washes and strain, ensuring the longevity and quality of their garments. By taking these steps, individuals can confidently fix fusible interfacing problems and enjoy well-crafted, perfectly interfaced clothes.

Scroll to Top