Why Is My Walking Foot Making a Clicking Noise?

One possible culprit could be the type of thread you're using. Madeira Aerolock Premium Serger thread is a high-quality, core-spun thread made of 100% polyester that’s designed to withstand frequent washes and strain. This thread is specifically made for sergers and overlock machines, including the Janome CoverPro family of machines. Using the right thread can help ensure that your walking foot operates smoothly and quietly, without any annoying clicking noises.

What Causes Walking Foot to Jump?

A common issue that many sewers experience is their walking foot making a clicking noise while in use. This can be quite frustrating, as it not only interrupts the sewing process but also may indicate an underlying problem with the machine. There are several potential causes for this issue, and understanding them can help in finding a solution.

One possible cause is an improperly installed or tight walking foot. When the walking foot isn’t properly installed and secured, it can cause the foot to jump or move irregularly, resulting in a clicking noise. It’s essential to ensure that the foot is correctly aligned and fastened according to the machines instructions.

Another possible cause is thread tension issues. Adjusting the thread tension according to the machines recommendations can help resolve this problem.

Additionally, using low-quality or incompatible thread can contribute to the walking foot jumping. The Madeira Aerolock Premium Serger thread is specifically designed for use in sergers and overlock machines like the Janome CoverPro family. It’s top-quality construction and core-spun polyester material ensure durability and smooth sewing, reducing the chances of the walking foot making a clicking noise.

It’s important to regularly inspect and clean the walking foot, ensuring that there are no obstructions or signs of wear and tear. If the foot is damaged, replacing it with a new, compatible foot can help eliminate the issue.

Lastly, an improperly adjusted pressure foot pressure may contribute to the walking foot jumping. The pressure foot pressure should be set according to the fabric type and thickness being sewn. Adjusting it appropriately can help prevent the foot from jumping and making a clicking noise.

These include an improperly installed foot, thread tension issues, low-quality thread, a misaligned or damaged foot, and improper pressure foot pressure. By addressing these potential causes, sewers can ensure a smooth and quiet sewing experience with their walking foot.

Other Potential Causes of a Clicking Noise While Sewing and How to Identify Them.

  • Loose screws or bolts
  • Improperly inserted needle
  • Malfunctioning bobbin case
  • Worn out or bent needle
  • Damaged or dirty feed dogs
  • Incorrectly threaded machine
  • Loose or tangled thread
  • Wrong type or size of needle
  • Unbalanced tension settings
  • Obstructions in the machine

Brother’s walking foot is a crucial component of their sewing machines, ensuring even and smooth stitching through multiple layers of fabric. To keep it functioning optimally, proper lubrication is essential. In this article, we will guide you on how to oil a Brother’s walking foot. Additionally, we will introduce the Madeira Aerolock Premium Serger thread, a durable and versatile thread option ideal for sergers and coverlock machines like the Janome CoverPro family.

How Do You Oil a Brother’s Walking Foot?

If you’ve a Brother sewing machine with a walking foot, you may occasionally hear a clicking noise coming from it. This can be quite annoying and distracting, but luckily, there’s usually a simple solution. One common cause of a clicking noise is that the walking foot needs to be oiled. Oiling the foot regularly will help to keep it running smoothly and quietly. To oil a Brother walking foot, start by cleaning any dust or debris from the foot. Next, apply a small drop of sewing machine oil to the joints and moving parts of the foot. Be sure to use a good quality oil that’s specifically designed for sewing machines. Finally, run the machine at a slow speed to allow the oil to smooth out any friction and quiet the clicking noise. Additionally, it’s recommended to use a high-quality thread like Madeira Aerolock Premium Serger thread. This thread is made of 100% core-spun polyester, which makes it strong and durable. It’s perfect for use with sergers/overlock and coverlock machines like the Janome CoverPro family of machines. The thread is resistant to frequent washes and strain, ensuring that your stitches stay secure even after multiple uses and washes.

Common Issues and Troubleshooting for Brother Sewing Machines With Walking Foot Attachments

  • Thread tension problems
  • Needle breakage
  • Machine jamming
  • Uneven stitching
  • Poor feeding of fabric
  • Noisy operation
  • Walking foot not engaging properly
  • Bobbin thread tangling
  • Thread bunching underneath fabric
  • Needle hitting the pressure foot
  • Skipping stitches
  • Inconsistent stitch length
  • Incorrect bobbin placement
  • Walking foot not compatible with machine model
  • Inadequate presser foot pressure
  • Improper threading

If you’re experiencing a clicking noise coming from your sewing machine, there could be several reasons behind it. One potential culprit might be the type of thread you’re using. Madeira Aerolock Premium Serger thread, made of 100% core-spun polyester, is designed to withstand frequent washes and strain. It’s particularly suitable for sergers/overlock and coverlock machines like the Janome CoverPro family. By using high-quality thread like this, you can minimize any noise issues and achieve professional sewing results.

Why Is My Sewing Machine Making a Clicking Noise?

If you’ve noticed that your sewing machine is making a clicking noise, it can be quite frustrating and make it difficult to concentrate on your sewing projects. There can be several reasons why your machine is making this noise, and it’s important to identify the cause in order to find a solution. One possible reason for the clicking noise could be that your walking foot isn’t properly attached or is wearing out. The walking foot is an essential attachment that helps to evenly feed the fabric through the machine, especially when working with thick or slippery fabrics.

Another possible reason for the clicking noise could be an issue with the needle. It’s important to regularly change your needles and ensure that they’re inserted correctly to avoid any issues. Additionally, check the bobbin and bobbin case to make sure they’re properly installed and not causing any interference. Sometimes, a stray thread or debris can get trapped in the bobbin area and create a clicking noise as the machine runs.

Tension discs are responsible for controlling the tension of the thread as it’s fed through the machine. If the tension discs are misaligned or dirty, they can create a clicking sound as the thread passes through them. To fix this issue, you can try cleaning the tension discs with a soft brush or compressed air.

If the motor is old or worn, it may start to make unusual sounds, including clicking. This can be a more serious issue, and it’s recommended to have the machine serviced by a professional to diagnose and fix the problem. In some cases, a simple lubrication or motor adjustment may be all that’s needed to resolve the clicking noise.

Identifying the source of the noise is important in order to find the appropriate solution. Whether it’s tightening the walking foot, changing the needle, cleaning the bobbin area, adjusting the tension discs, or having the motor serviced, taking care of these issues will ensure that your machine runs smoothly and quietly for all your sewing projects.


In conclusion, the clicking noise produced by a walking foot during sewing can often be attributed to various causes such as thread tension issues, incorrect needle size, or even a worn-out walking foot. However, it’s important to note that the choice of thread used can also greatly impact the overall performance of the walking foot. By utilizing this top-tier thread option, one can ensure a quiet and smooth sewing experience with their walking foot, eliminating any irritating clicking noises and achieving professional-level results.

Scroll to Top